Pioneer VRD1160-A Press cursor right to modify the selected speaker, Default setting Fix

The Initial Settings Menu

08

Use the Speaker Installation screen to tell the player what kinds of speakers you have connected.

1Use the / (cursor up/down) buttons to select a speaker

•The L and R, and RS and LS speakers are paired; you can’t set them differently.

Initial Settings
Digital Audio Out
Video Output	L	Large
Language	C	Large
Display	R	Large
Options	RS	Large
Speakers	LS	Large
	SW	On

2Press (cursor right) to modify the selected speaker.

3Use the / (cursor up/down) buttons to change the current setting.

•You can see the effect of your changes in the room graphic on the right of the screen.

•Except for the subwoofer, you can set speaker size to Large or Small. If the main speaker cone in the speaker is 12cm or more, set to Large, otherwise set to Small (or Off if you don’t have that speaker).

•If you set the front L and R speakers to Small, the center and surround speak- ers are automatically set to Small and the subwoofer to On.

•The subwoofer can only be set to On or Off.

4Press (cursor left) to go back to the speaker list if you want to modify another speaker, or press ENTER to exit the Speaker Installation screen.

•When listening to a DVD-Audio or DTS source, the C, LS, and RS speakers will automatically be set to the Large size setting. However, the sound will not be affected by the change. Listening to another source will return the speakers to their original settings.

•For DVD-Audio only, if the C, LS, or RS speakers is set to Off, the audio is automatically downmixed to stereo.

Channel Level

• Default setting: Fix

You only need to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs.

This setting does not affect digital audio output.

Initial Settings
Digital Audio Out	Audio Output Mode
		Fix
Video Output	Speaker Installation	Variable
Language	Channel Level
Display
Options
Speakers

When set to Fix, the level of each of the 5.1 channel analog outputs is fixed. Choose Variable if you want to adjust the relative levels to balance the surround sound better for your listening room.

English

61

En