Pioneer VSX-819H-S Connecting up, About video outputs connection, Analog audio cables, Deutsch 13

Connecting up 03

Analog audio cables

Use stereo RCA phono cables to connect analog audio components. These cables are typically red and white, and you should connect the red plugs to R (right) terminals and white plugs to L (left) terminals.

Analog audio cables

Right (red)

Left (white)

Digital audio cables

Commercially available coaxial digital audio cables or optical cables should be used to connect digital components to this receiver.1

Coaxial digital audio cable Optical cable

Video cables

Standard RCA video cables

These cables are the most common type of video connection and are used to connect to the composite video terminals. The yellow plugs distinguish them from cables for audio.

Component video cables

Use component video cables to get the best possible color reproduction of your video source. The color signal of the TV is divided into the luminance (Y) signal and the color (PB and PR) signals and then output. In this way, interference between the signals is avoided.

Component video cables

Green (Y)

Blue (PB)

Red (PR)

About video outputs connection

This receiver is not loaded with a video converter. When you use component video cables or HDMI cables for connecting to the input device, the same cables should be used for connecting to the TV.

English Français

Italiano Nederlands Español

Standard RCA video cable

Note

1• When connecting optical cables, be careful when inserting the plug not to damage the shutter protecting the optical socket.

•When storing optical cable, coil loosely. The cable may be damaged if bent around sharp corners.

•You can also use a standard RCA video cable for coaxial digital connections.

Deutsch

13

En