Pioneer VSX-819H-S Setting the Audio options, Nederlands Español Deutsch 39, English Français

Listening to your system 05

Setting the Audio options

There are a number of additional sound settings you can make using the AUDIO PARAMETER menu. The defaults, if not stated,

are listed in bold.

Important

•The AUDIO PARAMETER menu is not available with MULTI IN input (see Selecting the multichannel analog inputs on page 41).

•Note that if a setting doesn’t appear in the AUDIO PARAMETER menu, it is unavailable due to the current source, settings and status of the receiver.

			AUDIO		TUNER EDIT	MASTER
			PARAMETER	TUNE	TOOLS	VOLUME
			TOP		MENU
RECEIVER	INPUT SELECT SOURCE		MENU
			T		P
	ZONE 2		E		R
RECEIVER			S	ENTER	E
	ON/OFF	TV CONTROL	E		S
			R		E
			P
		INPUT			T
BD	TV	DVR	HOME
			MENU	T UNE	BAND
			SETUP
			iPod CTRL		RETURN
			CATEGORY

1Press RECEIVER on the remote control, then press AUDIO PARAMETER button.

2Use / to select the setting you want to adjust.

Depending on the current status/mode of the receiver, certain options may not be able to be selected. Check the table below for notes on this.

3Use / to set it as necessary.

See the table below for the options available for each setting.

4 Press RETURN to confirm and exit the menu.

English Français

Italiano

Setting	What it does	Option(s)
EQ	Switches on/off the effect of Acoustic Calibration EQ.	ON
(Acoustic Calibration
		OFF
EQ)
S.DELAY	Some monitors have a slight delay when showing video, so	0.0 to 9.0 (frames)
(Sound Delay)	the soundtrack will be slightly out of sync with the picture.	1 second = 25 frames
	By adding a bit of delay, you can adjust the sound to match	(PAL)/30 frames (NTSC)
	the presentation of the video.	Default: 0.0
MIDNIGHTa	Allows you to hear effective surround sound of movies at	M/L OFF
	low volumes.
		MIDNIGHT
LOUDNESSa	Used to get good bass and treble from music sources at
		LOUDNESS
	low volumes.
S.RTVb	When audio data is removed during the WMA/MP3c	OFF
(Sound Retriever)	compression process, sound quality often suffers from an
		ON
	uneven sound image. The Sound Retriever feature employs
	new DSP technology that helps bring CD quality sound
	back to compressed 2-channel audio by restoring sound
	pressure and smoothing jagged artifacts left over after
	compression.
DUAL MONOd	Specifies how dual mono encoded Dolby Digital	CH1 –
	soundtracks should be played.	Channel 1 is heard only
		CH2 –
		Channel 2 is heard only
		CH1 CH2 –
		Both channels heard
		from front speakers

Nederlands Español Deutsch

39

En