Pioneer VSX-819H-S For Taiwan exclusively, Dolby Laboratories, Audio are trademarks of DTS, Inc

D3-4-2-1-7b_A_En

D3-4-2-2-2a_A_En

D3-4-2-2-1a_A_En

Voltage selector

You can find the voltage selector switch onthe rear panel of multi-voltage models.220-240 V

The factory setting for the voltage selector is

220-240 V. Please set it to the127correctV 220voltageV for your country or region.

•Saudi Arabia operates on 127 V and 220 V mains110-127 V voltage. Please set to the correct voltage before using.

•For Taiwan, please set to 110-127 V before using.

•For Mexico, please set to 110-127 V before using.

For Taiwan exclusively

Taiwanese two pin flat-bladed plug

Before changing the voltage, disconnect the AC power cord. Use a medium size screwdriver to change the voltage selector switch.

D3-4-2-1-5_ChH

Medium size screwdriver

D3-4-2-1-5_En

VENTILATION CAUTION

When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 60 cm at top, 10 cm at rear, and 30 cm at each side).

WARNING

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be

blocked or covered with items (such as newspapers,

60 10 30 table-cloths, curtains) or by operating the

equipment on thick carpet or a bed.

If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. If connected to an AC outlet, the cut-off plug can cause severe electrical shock. Make sure it is properly disposed of after removal.

The equipment should be disconnected by removing the mains plug from the wall socket when left unused for a long period of time (for example, when on vacation).

CAUTION

The STANDBY/ON switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, Surround EX

!Epmcz!Mbcpsbupsjft!

and the double-D symbol are trademarks of Epmcz Qsp!Mphjd Tvsspvoe!FY

Dolby Laboratories.

!E! Epmcz!Mbcpsbupsjft!

Manufactured under license under U.S.

Patent #’s: 5,451,942; 5,956,674; 5,974,380;
	6-562-:53
5,978,762; 6,226,616; 6,487,535 & other U.S.
6-:67-785 6-:85-491 6-:89-873
and worldwide patents issued & pending.
7-337-727 7-598-646
DTS is a registered trademark and the DTS
	EUT
logos, Symbol, DTS-HD and DTS-HD Master
EUT-!Jod/	EUT
Audio are trademarks of DTS, Inc. ©
EUT.IE EUT.IE!Nbtufs!Bvejp EUT-!
1996-2007 DTS, Inc. All Rights Reserved.
Jod/	©2::7.3118!EUT-!

Jod/