Pioneer VSX-819H-S manual The System Setup menu, Speaker Setting, English Français

The System Setup menu 06

1Select ‘Manual SP Setup’ then press

ENTER.

System Setup			2.Manual SP		Setup
	1.Auto	MCACC		a.Speaker	Setting
	2.Manual SP Setup			b.Crossover Network
	3.Input	Assign		c.Channel	Level
				d.Speaker	Distance
		Return			Return

2Select the setting you want to adjust.

If you are doing this for the first time, you may want to adjust these settings in order:

•Speaker Setting – Specify the size and number of speakers you’ve connected (see below).

•Crossover Network – Specify which

frequencies will be sent to the subwoofer (page 44).

•Channel Level – Adjust the overall balance of your speaker system (page 44).

•Speaker Distance – Specify the distance of your speakers from the listening position (page 45).

3Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.

Speaker Setting

Use this setting to specify your speaker configuration (size, number of speakers). It is a good idea to make sure that the settings made in Automatically setting up for surround sound (MCACC) on page 9 are correct.

1Select ‘Speaker Setting’ from the Manual SP Setup menu.

2.Manual SP		Setup	2a.Speaker Setting
	a.Speaker	Setting	Front		SMALL
	b.Crossover Network		Center	[	SMALL ]
	c.Channel	Level	Surr	[	SMALL ]
	d.Speaker	Distance	Surr. Back	[	NO ]
			Subwoofer:		YES

Return Return

2Choose the set of speakers that you want to set then select a speaker size.

Use / to select the size (and number) of each of the following speakers:

•Front – Select LARGE if your front

speakers reproduce bass frequencies

effectively, or if you didn’t connect a

subwoofer. Select SMALL to send the bass frequencies to the subwoofer.1

•Center – Select LARGE if your center

speaker reproduces bass frequencies effectively, or select SMALL to send bass frequencies to the other speakers or

subwoofer. If you didn’t connect a center speaker, choose NO (the center channel is sent to the other speakers).

•Surr – Select LARGE if your surround

speakers reproduce bass frequencies effectively. Select SMALL to send bass frequencies to the other speakers or

subwoofer. If you didn’t connect surround speakers choose NO (the sound of the surround channels is sent to the other speakers).

English Français

Italiano Nederlands Español Deutsch

Note

1If you select SMALL for the front speakers, the subwoofer will automatically be fixed to YES. Also, the center, surround and surround back speakers can’t be set to LARGE if the front speakers are set to SMALL. In this case, all bass frequencies are sent to the subwoofer.

43

En