Listening to your system
Using the Sound Retriever
When audio data is removed during the compression process, sound quality often suffers from an uneven sound image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound back to compressed
jagged artifacts left over after compression.1
•Press S.RETRIEVER (SHIFT+) (SOUND
RETRIEVER) to switch the sound retriever on or off.
Playing other sources
1Turn on the power of the playback component.
2Turn on the power of the receiver.
3Select the source you want to playback. Use the input select buttons (INPUT SELECTOR).
4Start playback of the component you selected in step 1.
Selecting the multichannel analog inputs
If you have connected a decoder or a DVD player with multichannel analog outputs to this receiver (page 10), you must select the analog
multichannel inputs for surround sound.2
•Press DVD 5.1 (SHIFT+DVD) on the remote control or DVD 5.1 on the front panel. To cancel playback from the multichannel inputs, use the INPUT SELECTOR buttons to select a different input signal.
Note
1 The Sound Retriever is only applicable to
2During playback from the multichannel inputs, you can’t use any of the sound features/modes and only the volume and chan- nel levels can be set.
05
English Deutsch Français Italiano Nederlands Español
27
En