Pitco Frialator L22-306 service manual 2.2.3Hold Time, 2.2.4Hold Pre-Alarm

Solstice I12 Water Cooker Computer Service

Part #60153301

Display shows [S hh.mm:ss] [NAME nn ] where “nn” is the default key number, “S” means Shake, hh.mm:ss” is hour, minutes and seconds.

Use location keys for numeric entry to adjust the current setting. Press the

key to save

Shake Time and continue with Hold Time for this product key. A display of [TOO HIGH] indicates an entry greater than Cook Time. Press the [10/0] key to clear entry, and re-enter a valid number.

Note: Cook Time minus the time from the beginning of the cook = Shake value to enter.

Example: With a 3:00 Cook Time and a desired shake alarm at 1 minute into the cook, the value you enter would be 2:00 minutes. 3:00 – 1:00 = 2:00.

2.2.3Hold Time

Cooked product may stand in holding bins for a period of time. This timer produces an alarm to inform operators to discard old product and start a new cook. The Default for this value is zero, meaning the Hold Time is inactive.

Display is showing [H hh.mm:ss] [Name nn ], where “nn” is the default key number, “H” means HOLD, and “h.mm:ss” is minutes and seconds. Use the location keys for numeric entry to

adjust the current setting. Press the Alarm for this product key.

key to save hold time and continue with Hold Pre-

2.2.4Hold Pre-Alarm

Hold Pre-Alarm is a timer setting that is used to warn operators that the Hold Time is about to expire. To use Hold Pre-Alarm, time value must be a non-zero value, and must be set to a value less than Hold Time. The default value is zero, meaning the Hold Pre-Alarm is inactive.

Display is showing [P hh.mm:ss] [Name nn] where “nn” is the default key number, P means Pre-Alarm, and “hh.mm:ss” is minutes and seconds.

Use the location keys for numeric entry to adjust the current setting.

Press the

key to save Hold Time and continue setup for this product key. A display of

[TOO HIGH] indicates an entry greater than Hold Time. Press the [10/0] key to clear entry, and re-enter a valid number.

Note: Hold Time minus the time from the beginning of the cook = Hold value to enter.

Example: With a 55:00 hold time and a desired alarm at 35 minutes into the hold period, the value you enter would be 20:00 minutes. 55:00 – 35:00 = 20:00.

The prior four steps in table

To Set a Product Key for Cook, Shake, Hold, HPA times,

and Food Safe temperature

form:

		Press	[Clock]
		Display shows	[SELECT]	[PRODUCT]
		Press	the desired product [Key#]
Cook	Time	Display shows	[C hh.mm:ss]	[NAME nn]
		Enter	enter/change desired Cook time.
		Display shows	[C hh.mm:ss]	[NAME nn]
		Press	[Clock]
Shake	Time	Display shows	[S hh.mm:ss]	[NAME nn]
		Display shows	enter/change desired Shake time.
		Enter
			[S hh.mm:ss]	[NAME nn]
		Press	[Clock]
Hold	Time	Display shows	[H hh.mm:ss]	[NAME nn]
		Enter	enter/change desired Hold time.
		Display shows	[H hh.mm:ss]	[NAME nn]
		Press	[Clock]
PreAlarm	Time	Display shows	[H hh.mm:ss]	[NAME nn]
		Enter	enter/change desired HPA time.
		Display shows	[H hh.mm:ss]	[NAME nn]

C is Cook, nn is key

S is Shake, nn is key

H is Hold, nn is key

P is Pre-alarm, nn is key

L22-306 Rev 0 7