Pitco Frialator SSHLV14 operation manual Self Cleaning Burner System not on ALL Models

INSTALLATION & OPERATIONAL SGLV MANUAL

13.4.SELF CLEANING BURNER SYSTEM (NOT ON ALL MODELS)

If your appliance is equipped with the self cleaning burner system, the appliance should behave as outlined in the table below. A cleaning cycle will execute every time the appliance is turned “ON” from an “OFF” state. The thermal cut out switch is designed to disable the appliance if the Self Cleaning Burner System malfunctions and remains activated for an extended period of time or if there is a downdraft into the flue or a blocked flue situation.

Event	Duration	Indication
Turn appliance “ON”	N/A	Control Illuminates, pilot sparks and ignites. Pre-Purge
		pulse is initiated.
Pre-Purge Pulse	2 seconds	Appliance operates briefly and stops. Pilot remains lit.
Interwaiting period 1	5 seconds	Appliance does not operate. Pilot remains lit.
		Main valve operates, lighting main burners. SCBS valve
Cleaning Pulse	6 seconds	operates, feeding gas to the SCBS Arm. The SCBS arm
		ignites, initiating a brief burn at the main burner orifice of
		each burner.
Interwaiting period 2	8 seconds	The Main and SCBS valves de-energize for this period.
		The pilot remains lit.
		The appliance operates normally and begins to heat up.
Normal operation	N/A	The SCBS Valve remains de-energized until power to
resumes		the appliance is recycled. There is no flame on the
		SCBS Arm. There is no burn at the main burner orifices.

13.5.RESETTING THE SELF CLEANING BURNER SYSTEM TEMPERATURE LIMIT SWITCH

1.Turn the appliance off.

2.Allow the appliance ample time to cool to room temperature.

3.Press the SCBS high limit reset button. The reset button is located behind the front panel at the top of the main burners.

4.The SCBS high limit switch is now reset and ready for startup.

5.If the SCBS high temperature limit switch continues to trip, have the appliance inspected by an Authorized Professional.

L20-407 rev. 1 (3/14) 35