INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL
5. COMPUTER CONTROLLER OPERATION
L | 1 | 2 |
3 | 4 | 5 |
6 | 7 | 8 |
9 | 0 | R |
5.1.TO TURN THE APPLIANCE ON:
If power is applied to the appliance, the displays will show [OFF]. Press the [I/O] key. Displays will show one of the normal displays: [HEATING]; [MELTING] [SOLID]/[LIQUID]; or [READY]. Some messages may show in both left and right displays. Wait for the appliance to heat up to the [READY] condition before cooking.
5.2.TO TURN THE APPLIANCE OFF:
Press the [I/O] key. Display will momentarily show the software version number and then [OFF][OFF]. Use the Left [I/O] key for left side and Right [I/O] key for the right of dual vat control 60126802. Either key may be used on the single vat controller.
5.3.TO START A COOK:
When displays are showing [READY] the appliance has reached set temperature and is |
|
|
|
4 |
| ||
ready to cook. Press the desired product key, and place product into the vat. The |
|
|
|
indicator above the product key will flash to indicate the cook timer is running. In the |
|
|
|
|
|
| |
example above, product 4 is cooking with 2 minutes and 28 seconds remaining. The right |
|
|
|
side display has no running cook timers, and shows [READY]. |
|
|
|
|
|
| |
|
|
| |
Multiple cooks may run together. While cooks are running, the displays will always show the cook with the least time remaining. Longer running cooks will flash their indicators at a slower rate. Cook time remaining on these keys may be checked by momentarily pressing the product key.
5.4.TO CANCEL A COOK:
Press and hold the product key to cancel a running cook. If no other cooks are pending, controller displays will return to [READY].
5.5.TO VIEW ACTUAL AND SET TEMPERATURES:
To view the actual vat temperature, press the thermometer key. The display will show [ACT nnnF] or [ACT nnnC], where nnn is the current vat temperature. After a few moments, the display will return to [READY], [MELT ], or [HEATING] when no cooks are running, or, [CKn mm:ss] for any cooks still running.
To view the set temperature, press the thermometer key twice. The display will
show [SET nnnF] or [SET nnnC], where nnn is the current set temperature. After a few moments, the display will return to [READY], [MELT ], or [HEATING] , or,
[CKn mm:ss] for a cook still running.
19 |
