Troubleshooting
No Postage Imprint On Envelope
Indicator Light | Cause |
Check mailpiece | Envelope was not |
| placed against rear |
| wall when fed. |
Solution
Press Clear. Make sure envelope is against rear wall. Feed envelope. (If the envelope was sealed, press Print Only before feeding.)
Check meter | Postage exceeds the |
| meter high value |
| lock level. |
Press the green button twice until triple Select Postage bars appear. Press Clear button on the control panel.
For more information, see your postage meter operating guide.
| Not enough postage | Reset meter with postage. |
| credit left in meter. |
|
| Operate/Remove | Move lever to operate |
| Lever not in | position. |
| Operate position. |
|
| Meter dater door is | Close meter dater door. |
| open. |
|
Seal Only | Seal Only button | Press Print Only. Refeed |
| selected. | envelope. |
SV60975 Rev A
22
