6.2.2 Max Bright Jumper

The photodiode board can be removed from the system. When the photodiode board is unplugged the LC1200R will default to the minimum brightness mode. If the user would like to display to run at maximum brightness, the MAX BRIGHT, JP1, jumper must be inserted on the inverter board. See Figure 8

Figure 7

Install jumper to flip

Install jumper to

Mirror

Figure 8

Insert Jumper for

Max Brightness

LC1200R User’s Guide 021-0183-00 Rev A

19 of 29

Page 19
Image 19
Planar LC1200R user manual Max Bright Jumper