If ｀H. Position＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust the setting of H. position of the OSD display. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly.
If ｀V. Position＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust the setting of V. position of the OSD display. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly.
If ‘Exit’ is selected, it will exit the “Clock/Phase” submenu and back to the “Main Menu”.
Doing Factory Recall
To recall factory settings back you should follow the steps below:
1.
2.Use ｀Up(△)＇ (or ｀Down(▽)＇) to move forward (or backward) to the factory recall icon and highlight it.
17
