DLP® Projector – User’s Manual
Resetting the Lamp
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
1.
2.
3.
4.
Press the Menu button to open the Image menu.
Press the cursor ◄► button to move to the Installation II menu. Press the cursor ▲▼ button to move down to Advanced.
Press the cursor ▼▲ button to move down to Lamp Hour Reset.
Press the cursor ► or Enter button.
A message screen appears.
5. Press the cursor buttons in this order: ▼▲◄►.
The Lamp Hours reset to zero.
– 38 –
