UltraRes LED Codes
Troubleshooting During Installation
This section includes troubleshooting information about different issues you may encounter during the installation process or after your display has been running for some time. If you are not able to solve your issue in this section, please contact Planar’s Technical Support team for assistance.
UltraRes LED Codes
The LED on the UltraRes display will show different things, depending on the state of the display.
System State | LED Behavior |
|
|
Power Up | LED blinks on and off every 500 ms until it goes into |
| standby mode. |
|
|
Standby | After the LED is powered on, the LED will be red |
| while in standby mode. |
|
|
Error | LED blinks on for 2 seconds and off for 4 seconds. |
|
|
Firmware Upgrade | LED blinks on for 1 second and off for 1 second. |
|
|
Cool Down | Off |
|
|
Planar UltraRes User Manual | 101 |
