Installing USB Drivers
10Once the installation is complete, click Close to close the program.
Installing USB Drivers
When you install the UltraRes Control software, it will automatically install the necessary USB drivers needed for communication between your computer and to the UltraRes display. You only need to complete a few steps to finish the installation process.
1Plug one end of the USB cable into your computer and the other into the UltraRes display.
2Windows will detect the new hardware and attempt to install the drivers. If this occurs, you should see a message similar to the following example.
3If the USB driver installation is successful, you will see a message similar to the example below. You are now done with the USB driver installation process.
42 | Planar UltraRes User Manual |
