Planar XP37W manual Memorizing Channels, Selecting the TV Signal Source

Memorizing Channels

Your TV can memorize and store all of the available channels for both standard broadcast (antenna) and cable channels. After the available channels are memorized press the △ or ▽ button to view stored channels. You can also view any channel (even non-memorized) by directly entering the channel digits via the remote control.

There are three steps to memorizing channels:

1.Selecting a TV signal input source

2.Memorizing the available channels (automatically)

3.Adding/Erasing channels (manually)

Selecting the TV Signal Source

Before your television can begin to memorize available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1.Press the TV button to set the main display to TV mode. Press the Menu button to display TV from the main menu.

2.Press the △ or ▽ button to select the SOURCE option.

3.Press the ◁ or ▷ button to select between Antenna, AIR , CATV , HRC , IRC source signals.

CONTROL

BUTTONS

28