Planar XP37W manual Programming Remote Control, Direct Device Code Setup

Programming Remote Control

A. Direct Device Code Setup

Although your Remote Control is set up to provide control of this TV, you can specify other devices to be controlled, according to the following steps.

[MODE] → <<SET>> (2 blinks) → 5- digit device codes (2 blinks) STEP 1 Locate the desired device in the Device code list.

STEP 2 Select the [MODE] by pressing VCR, CBL, or AUX.

[MODE]	Device Assignment	Device
		Group no.
TV	Locked to this TV (Default)	-------
VCR	Universal VCR, DVD, PVR	2
CBL	Universal Cable, Satellite, Video Accessory	0
AUX	Universal Tuner, Amplifier, CD, Mini Disc.	3
	And Misc. Audio, Home Automation

STEP 3 Depress and hold <<SET>> button for a minimum of 3 seconds until LED blinks twice.

STEP 4 Enter the 5-digit code for the desired device. The LED blinks once for every digit entered except for the last digit, where it shall blink twice to confirm that a valid code has been programmed.

NOTE

*Each digit must be entered within 10 seconds, or the Remote Control shall exit programming state.

*Two short LED blinks indicate recognition of the code, after which device control via the remote is enabled.

*A long LED display indicates non-recognition of the code, at which time the code should be re-entered.

Example: [VCR]→<<SET>> (2 blinks)→[2]→[0]→[0]→[3]→[5] (2 blinks).

56