5.11 Preview Properties
In “Preview” menu, you can setup preview mode, screen switch time, enable or disable audio preview and preview layout.
Step 1：Enter into “Preview” menu：In the main menu, move “Active Frame” to “Preview” icon and press【ENTER】, you can enter into “preview” menu.
Step 2：Preview properties：
Preview mode：For preview mode item, you can use【↑】【↓】key to select one mode. If DVR has only 1 channel, you can select only “1 Screen” option. If DVR has 4 channels, there are “1 Screen” and “4 Screen” options. If DVR has more than 4 but less than 9 channels, there are “1 Screen”, “4 Screen” and “9 Screen” options. If DVR has 16 channels, there are “1 Screen”, “4 Screen”, “9 Screen”, “12 Screen” and “16 Screen” options.
Switch time：That is image preview switch time. You can use【↑】【↓】keys to select switch time. There are many options, including “5 Seconds”, “10 Seconds”, “20 Seconds”, “30 Seconds”, “1 Minutes”, “2 Minutes”, “5 Minutes” and “Nerver”. If you select “Nerver”, the preview image will not be switched automatically. For example, for 16 chanenls DVR, if you select “4 Screen” preview mode and “20 Seconds” switch time, DVR will cycle display 4 channels image every 20 seconds.
Audio preview：If you enable audio preview (“9”), when you preview single camera, DVR will play the audio of that channel.
Display delay：If you enable “On Screen Warning” option, when there are several cameras has alarm, DVR will popup the camer screen one by one according to this time interval
Page 54
