Rear Panel Description | Planet Technology DVR-470, DVR-1670

2.3Rear Panel Description

Notice：Please refer to real product for different model.

DVR-470 Rear Panel

DVR-1670 Rear Panel

	Index	Physical Interface	Description

	1	Video Input	Standard BNC.

	2	Video Output	Connect monitor, output video and menu.

		Audio Output	1 channel RCA (1.0 Vp-p, 75Ω)
		Audio Output	1 channel RCA (1.0 Vp-p, 75Ω)

	3	Audio input	4 channel RCA (1.0 Vp-p, 75Ω)

	4	Video Loop out	DVR-1670 uses DB15 connectores. DVR-470 uses on
	4	Video Loop out	board BNC connectors.
			board BNC connectors.
		VGA Interface	VGA display.
	5
	5	RS-232	Connect RS-232 devices. Refer to Appendix B for pin
			Connect RS-232 devices. Refer to Appendix B for pin
			definition.
			definition.
	6	UTP Network Interface	Connect network devices. Refer to Appendix B for pin
	6	UTP Network Interface	definition.
			definition.
	7	RS-485	PTZ connection. Refer to Appendix B for pin definition.

Page 9

Image 9

Planet Technology DVR-470, DVR-1670 user manual Rear Panel Description

Contents

USER’S Manual Copyright Weee regulation Safety Content Appendix B Product Introduction FeaturesSummary Compression Preview and playback AlarmsOthers Network Installation Checking the DVR and Its AccessoriesHDD Installation Rear Panel Description External Alarm In/Out Connection Operational Instructions Front PanelType Name Description REC Index Name Description IR Controller Switch the DVR off Stop using IR controllerWhen IR controller can not work normally Loading the batteries into the IR controller Menu Description Transaction How to enter into menu modeUtilities Main Menu Description How to exit menu Character Input Power on Basic Operation GuidePreview Icon Icon Color Status Description Camera alarm status is following： User name and password LoginModify password Page PTZ control interface PTZ ControlSelect channel PTZ control keys description Adjust preset description Start/Stop auto in PTZ control modeExit PTZ control mode Manual Record Manual recordExit manual record Playback interface Playback Three kinds of playback mode Operation when playback Exit playback Backup intraday recorded files Backup Recorded Files ：Select backup device ：Select the files that you want to backup：Start and finish backup Backup video segment Shut down DVR abnormally Use the power switch of real panel Use【POWER】key of front panel or IR controllerTake away the power cable Shut Down DVR Parameters Setup Guide Administrator and PasswordPassword modification Page Add and Delete User User rights description Local Rights：：Save the new user’s password and rights MAC address Remote Rights：Locoal Play Remote Play Unit Name and Device ID Unit nameDevice ID： Video Output Standard and VGA Setup VGA setupVideo output standard OSD Setup System TimeDisplay System Time Camera Name Setup Camera Name Position ：Enter into Image Setup menu： Video Parameters Setup Mask Area Setup Page ：Enter into Image Setup memu： View Tampering AlarmPage Video Loss Alarm Page ：Select camera：Use【Ç】【È】key to select one camera Motion Detection Alarm Clear motion area： Please refer to .12 for recording setup ：Preview properties： Preview PropertiesPage Recording menu description： Recording SetupPage None all day recording setup ：Select ond day and enable all day recording option：Record type ：Copy to other days ：Setup time period and record type ：Select ond day and disable all day recording option External alarm input setup：：Select one alarm input External Alarm Input and Relay Output：Alarm type ：Enter into Alarm in Handling sub menu ：Schedule for alarm handle method ：Alarm trigger record channel setup：Alarm handle method ：Save setup ：Copy the parameters to other external alarm input Alarm relay output setup：Select delay time ：Enter into alarm out schedule ：Setup alarm out schedule：Copy one alarm output parameters to other alarm output Network menu description： Network Parameters 15 PTZ PTZ menu description Sequence setup Preset setup Cruise setup Page RS232 menu description 16 RS232 setup Example：PPP Modem passive dialup through Pstn Setup at DVR end Setup should be specially pay attention to： Page ：Establish the dialup connection Exceptions Transaction Information Page Receive the command sent by ATM through serial port Page Restore Parameters UtilitiesSave Parameters Upgrade Reboot Clear Alarm OutPower Off Hard Disk Management By Type For example：The steps of viewing alarm log By Type&Date By Time System Information FTP Server Setup Firmware UpgradePage Page Upgrade Mode UTP network connect cable made method Appendix a DVR Connect Cable DefinitionMaterial and tool Pin definition RS-232 connect cable made method Model name DVR-470 Appendix B Specifications Power supply 100~240VAC, 6.3A, 50~60 HZ USB CD-R/W： Appendix C List of Recommended DVR PeripheralsPage Type Name Description Index Appendix D Quick Search Function Table OSD Failure Possible reasons Appendix E Troubleshooting