Chapter 3

3

Configuration

This Chapter provides details of the software configuration process.

Login

ICA-100 series must be configured through its built-in Web-based Configuration. Extensive knowledge of LAN will be helpful in setting up. From the web browser, type http ://192.168.0.20 in the address box to access Home page of ICA-100 series.

If you can't connect

If ICA-100 series do not respond, check the following:

∙ Machine is properly installed, LAN or WLAN connection OK, and it is powered ON. You can test the connection by using the "Ping" com- mand:

∙Open the MS-DOS window or command prompt window.

∙Enter the command:

ping 192.168.0.20

If no response is received, either the connection is not working, or your PC's IP address is not compatible with ICA-100 series’ IP Ad- dresses. (See next item.)

∙Ensure that your PC is using an IP Address within the range 192.168.0.1 to 192.168.0.254 (excluding 192.168.0.20).

Also, the Network Mask should be set to 255.255.255.0 match ICA- 100 series.

In Windows, you can check these settings by using Control Panel- Network to check the Properties for the TCP/IP protocol.

Home Page

After the default IP address is entered from the browser, the Home page will appear with a still image. There will be three options to choose from to set-up and view your Internet Camera and they are as follows:

•View Image – ActiveX Mode

•View Image – Java Mode

•System Administration

8