Planet Technology ICA-100, ICA-100W manual Trigger

Broadband Router User Guide

Note: Please find below NTP server web address for your reference to set the time server.

http://www.eecis.udel.edu/~mills/ntp/clock1.htm

http://www.eecis.udel.edu/~mills/ntp/clock2.htm

Protocol:

Two options of NTP or Time are available for your selection to link with the Time Server. The default setting is NTP.

TimeZone:

System administrator must select the time zone for the region. Please refer to the appendix for the time zone selection table.

To set the Date Time manually select “Set Manually” and system administrator must enter the Date and Time in the respective field manually.

Note: When you select Set Manually, each time ICA-100 series is powered off and on you must re-enter the details once again due to time lost.

Save/Cancel:

After making sure all settings in the DateTime are correct, click on the “Save” icon to store the settings for ICA-100 series. You can alternatively click on the “Cancel” icon to restore all settings to the values last saved to or retrieved from ICA-100 series.

Trigger

The Trigger menu contains commands for the I/O Trigger connectors providing the physical interface for 2 digital output and 2 digital input that is used for connecting a diversity of external alarm devices to ICA-100 series such as IR-Sensor and alarm relay. Click on “Trigger” in the system administration menu bar and the Trigger screen will appear as illustrated below:

18