PC Configuration
Figure
Camera Name:
This field is used for entering a descriptive name for the device. The default setting for the Camera Name is
Location:
This field is used for entering a descriptive name for the location used by
Admin:
This field is used for entering the Administrator ID along with the password to access the System Administration settings. Be sure to enter the password twice to confirm the details once in the Admin Password field and again in the Confirm Password field. The default setting for Admin is blank space (Null String) you need to key in the Admin ID with a maximum length of 12 (Printable ASCII) characters and enter the Admin Password with a maximum length of 8 (Printable ASCII) characters. Please note that Admin ID and Admin Password must be set before using IPView utility to connect Internet Camera; otherwise the Internet Camera can not be added to IPView.
IP Assignment:
There are two options to select from the IP Assignment.
Note: Access to
Manually Assign
You can click “Manually Assign” and directly enter the IP address. The default settings are as follows:
·Default IP – 192.168.0.20
·Subnet Mask – 255.255.255.0
·Default Gateway – 0.0.0.0
Assign Automatically Using
If your network is using RARP, BOOTP or DHCP server you can click “Assign Automatically Using” and click on “RARP”, “BOOTP” or “DHCP”. Under this setting
DNS IP Address:
DNS (Domain Name System) server is an Internet service that translates domain names into IP addresses. Enter at least one DNS IP Address.
Dynamic DNS:
Click Yes/No to enable/disable DDNS function. Before you use this function, you must register a hostname from a DDNS service provider first.
Service Provider
11