Broadband Router User Guide

The period of time between each email being sent to the receiver. If the setting is at 10 seconds, a new e-mail will be sent in 10 seconds interval to the receiver.

Sending Time

The number of times the e-mail will be sent to the receiver before it terminates.

Select “Trigger I/O Output” and enter the setting for Output 1 time and Output 2 time in seconds. These fields determine the duration for activating the external output devices.

I/O Input 2 Trigger setting procedures are same as above.

Save/Cancel:

After making sure all settings in the System are correct, click on the “Save” icon to store the settings for ICA-100 series. You can alternatively click on the “Cancel” icon to restore all settings to the values last saved to or retrieved from ICA-100 series.

Please refer to the appendix for detailed information regarding the I/O Connector.

Warning

When connecting other devices through the I/O connectors, please make sure the maximum current of 100mA is strictly observed. Any failure to do so might cause a loss of power to ICA-100 series and possibly cause serious damage to ICA-100 series.

Upload

The Upload menu contains commands for setting ICA-100 series to upload images to a specified FTP server, time scheduling, and manual operation. Click on “Upload” in the system administration menu bar and the Upload screen will appear as illustrated below:

Note: Before using the Upload function, please ensure the User account used has “write” permission of the FTP server or the specified folder.

20