PC Configuration
Figure 3-9: Information Screen
The Information table provides detailed information of ICA-100 series such as the Model Name, Firmware Version, Mac Address, and IP Address.
ToolsThe Tools menu contains commands for restarting ICA-100 series. Click on “Tools” in the system administration menu bar and the Tools screen will appear as illustrated below:
Figure 3-10: Tools Screen
Reset:
The Reset command restarts ICA-100 series just like turning the device off and on and saved settings are retained. The Reset panel contains the message “Do you really want to reset this device?” and a YES button. If you do not want to reset ICA-100 series, exit the panel without clicking YES, otherwise, click on the “YES” icon and the reset process will initiate.
Factory Reset:
A factory reset restarts ICA-100 series and returns all of its settings to their default values. The Factory Reset panel contains the message “Do you really want to factory reset this device?” and a YES button. If you do not want to carry out a factory reset command, exit the panel without clicking YES, otherwise click on the “YES” icon and factory reset will be initiated.
Note: The Network must be reconfigured after a Factory Reset. Once the configuration is completed click on “Home” to return to the Welcome screen and select the desired Viewing Image either through ActiveX Mode or Java Mode as described in the next section. Then position ICA-100 series to the desired location appropriately for your purpose. Followed by adjustment of ICA-100 series focus, done