The administrator has to register an IKVM-1000 that is supposed to take part in the service with the Dynamic DNS Server and assign a certain hostname to it. He will get a nickname and a password in return to the registration process. This account information together with the hostname is needed in order to determine the IP address of the registered IKVM-1000.

You have to perform the following steps in order to enable Dynamic DNS:

•Make sure that the LAN interface of the IKVM-1000 is properly configured.

•Enable Dynamic DNS and change the settings according to your needs.

Enable Dynamic DNS

This enables the Dynamic DNS service. This requires a configured DNS server IP address.

Dynamic DNS server

This is the server name where IKVM-1000 registers itself in regular intervals. Currently, this is a fixed setting since only dyndns.org is supported for now.

Hostname

This is the hostname of the IKVM-1000 that is provided by the Dynamic DNS Server. ( use the whole name including the domain, e.g. testserver.dyndns.org , not just the actual hostname).

Username

You have registered this username during your manual registration with the Dynamic DNS Server. Spaces are not allowed in the Nickname.

Password

You have used this password during your manual registration with the Dynamic DNS Server.

Check time

The IKVM-1000 card registers itself in the Dynamic DNS server at this time.

Check interval

43