Warning: the initial IP configuration is usually done directly at the host system using the initial configuration procedure. Changing the network settings of the IKVM-1000 might result in losing connection to it. In case you change the settings remotely, make sure that all the values are correct and you still have an option to access the IKVM-1000.

IP auto configuration

With this option you can control if the IKVM-1000 should fetch its network settings from a DHCP or BOOTP server. For DHCP, select “dhcp” , and for BOOTP select “bootp” accordingly. If you choose “none” then IP auto configuration is disabled.

IP address

IP address in the usual dot notation.

Subnet Mask

The net mask of the local network.

Gateway IP address

40