In case the IKVM-1000 should be accessible from networks other than the local one, this IP address must be set to the local network router's IP address.

Primary DNS Server IP Address

IP address of the primary Domain Name Server in dot notation. This option may be left empty, however the IKVM-1000 will not be able to perform name resolution.

Secondary DNS Server IP Address

IP address of the secondary Domain Name Server in dot notation. It will be used in case the Primary DNS Server cannot be contacted.

Remote Console And HTTPS port

Port number at which the IKVM-1000's Remote Console server and HTTPS server are listening. If left empty the default value will be used.

HTTP port

Port number at which the IKVM-1000's HTTP server is listening. If left empty the default value will be used.

Telnet port

Port number at which the IKVM-1000's Telnet server is listening. If left empty the default value will be used.

Bandwidth limitation

The maximum network traffic generated through the IKVM-1000 ethernet device. Value in Kbit/s.

Enable Telnet access

Set this option to allow accessing the IKVM-1000 using the Telnet protocol.

Disable Setup Protocol

Enable this option to exclude the IKVM-1000 from the setup protocol.

41