configure a dial-up network connection, which defaults to the right settings like PPP.
The Modem Settings panel allows you to configure the remote access to the IKVM-1000 using a modem. The meaning of each parameter will be described below. The modem settings are part of the serial settings panel.
Serial line speed
The speed the IKVM-1000 is communicating with the modem. Most of all modems available today will support the default value of 115200 bps. In case you are using an old modem and discovering problems try to lower this speed.
Modem Init String
The initialization string used by the IKVM-1000 to initialize the modem. The default value will work with all modern standard modems directly connected to a telephone line. In case you have a special modem or the modem is connected to a local telephone switch that requires a special dial sequence in order to establish a connection to the public telephone network, you can change this setting by giving a new string. Refer to the modem's manual about the AT command syntax.
Modem server IP address
This IP address will be assigned to the IKVM-1000 itself during the PPP handshake. Since it is a point-to-point IP connection, virtually every IP address is possible but you must make sure, it is not interfering with the IP settings of the IKVM-1000 and your console computer. The default value will work in most cases.
Modem client IP address
This IP address will be assigned to your console computer during the PPP handshake. Since it is a point-to-point IP connection, virtually every IP address is possible but you must make sure, it is not interfering with the IP settings of the IKVM- 1000 and your console computer. The default value will work in most cases.
49
