|
| User’s Manual of | |
| • Inactive Timeout | Use the parameter to set an inactive timeout. The unit drops the connection if | |
|
| there is no activity on the serial line before the set time expires. To disable the | |
|
| inactive timeout enter “0”. | |
|
|
|
|
|
|
|
|
HyperTerminal is a program that you can use to connect to other computers, Telnet sites, online services, and host computers, using either your modem, a null modem cable, a Console cable or Ethernet connection.
The users want to use the TCP Server mode to connect to a Ethernet Switch via Hyper Terminal, Winsock mode
1.Setup Operation Mode and Serial Port of
2.Hyper Terminal set up a new connection with the TCP/IP Winsock
Setup Operation Mode and Serial Port of1.From the WEB interface, set the Serial operation mode of
Figure
2.Set the Serial Port Configuration of
Mode: | |
Baudrare: | 9600 |
|
|
Character Bits: | 8 |
|
|
Parity Type : | none |
|
|
Stop Bit : | 1 |
|
|
Hardware Flow Control: | none |
|
|