User’s Manual of ICS-10x

5.2 Search the Device

Click the Search Device button to find the ICS-10X. It will show the ICS-10X device name, project name, MAC address, IP address, Sub Mask, Gateway and the connect port number.

1.Click the shortcut of VCOM on the desktop to run the VCOM program.

2.Click "Search Device" button in Search Device tab. If any ICS-10x series device on the LAN, it will show the device name in the tree report. While user click the device name, it will show device information in the list report.

Figure 5-5VCOM Device Search

5.3 Virtual COM

This function should be set the ICS-10X’s operation mode to “Virtual COM” on the Web.

Choose to create port like below:

1.If the device support Telnet, while user click device name, it will show VCOM tab.

2.While user click VCOM tab, it will fill IP Address and Port number automatically.

3.Select COM Port Name

4.Click "Create Port" button to create new virtual com port and establish telenet connection

-51-