User’s Manual of ICS-10x
Example: Two ICS-10x with Pair Connection modeOne be configured as Pair Connection – Local (Master)The other one be configured as Pair Connection – Remote (Slave)Via the RS-485 interface, the external scanners, speed dome cameras and PTZ receivers can be controlled by the keyboard which provides upward, downward, leftward, rightward, clockwise and counterclockwise with the joystick. In this case, we use two ICS-10x to extend the distance between an IP surveillance PT Camera and a Control keyboard. Both of the two equipments are implemented with RS-485 interface.
The two of the ICS-10x master and slave with below settings:
| ICS-10x Master | |
| | |
| Connect to | Control Keyboard |
| | |
| IP Address / Subnet Mask | 192.168.0.100 / 255.255.255.0 |
| | |
| Operation Mode | Mode: Pair Connection – Local |
| TCP Port Number : 1024 |
| |
| | |
| | Serial Mode: RS-485 |
| | Baudrare: 9600 |
| Serial Port Configuration | Character Bits: 8 |
| Parity Type : none |
| |
| | Stop Bit : 1 |
| | Hardware Flow Control: none |
| | |
| | |
| ICS-10x Slave | |
| | |
| Connect to | Speed Dome Camera, PTZ or Scanner |
| | |
| IP Address / Subnet Mask | 192.168.0.101 / 255.255.255.0 |
| | |
| | Mode: Pair Connection – Remote |
| Operation Mode | Remote Host IP Address : 192.168.0.100 |
| | Remote Host Port Number : 1024 |
| | |
| | Serial Mode: RS-485 |
| | Baudrare: 9600 |
| Serial Port Configuration | Character Bits: 8 |
| Parity Type : none |
| |
| | Stop Bit : 1 |
| | Hardware Flow Control: none |
Topology: | |
Figure 4-49Two ICS-10x configured with Pair-Connection
-44-
