Plasmon D875, D2175 user manual Loading Media, Magazine Slots

Loading Media

There are two methods for loading media into the D875 - D2175 libraries:

•High Speed Bulk Loading (recommended): This method is intended as the first time solution to mass load the library with media when the library is off-line. This method utilizes all six magazine slots to load the library.

•I/E Port Magazine Loading: This is intended for importing and exporting up to ten pieces of media in a removable magazine while the library is on-line.

When loading the library for the first time, use the high speed bulk loading method described below:

1.Turn on the power.

2.From the front panel menu select Set Up Library>Offline Operations>Bulk Load Library.

3.Open the library front door and the magazine access door. Note that when the Bulk Load Library option is selected, the magazine door opens.

4.Place a pre-loaded magazine in each magazine slot (magazine 1 through magazine 6).

5.When the green LED goes out, remove the appropriate empty magazine and install the next full magazine.

NOTE

Third party software is required to operate the library

Magazine Access Door

Magazine Eject

Button

Magazine 6

41 - 50

Load Status

Indicator

Magazine 5

31 - 40

Magazine 4

21 - 30

Magazine 3

11 - 20

Magazine 2

1 - 10

I/E Slot

IE 1 - IE 10

Figure 8. Magazine Slots

Plasmon D875 - D2175 User Manual	Library Installation
Document Revision E	Page 21