SCSI Connection
Turn the library’s power switch to the off position prior to connecting the SCSI interface.
The library requires a host computer with a dedicated LVD SCSI host bus adapter (HBA). Ensure that the library is powered off prior to connecting the SCSI cables.
The SCSI cable passes through the bottom of the library into the appropriate SCSI connector inside the front door of the library.
CAUTION
Ensure the host computer provides an LVD SCSI interface. HVD SCSI is not compatible with LVD SCSI. If an improper connection is made, damage to the library or connected equipment could result.
SCSI Connection
(one, two, or three buses)
Figure 7. Connecting the SCSI Interface
Library Installation | Plasmon D875 - D2175 User Manual |
Page 20 | Document Revision E |
