Plasmon user manual Library Packing Instructions, Packing the D875 D2175 Libraries a

Library Packing Instructions

This section is provided in case it is necessary to ship the library (without expansion bays) to another location or back to Plasmon. Instructions on how to pack the expansion bays is provided later in this chapter. These procedures must be followed.

CAUTION

Plasmon libraries must be shipped in the original packaging. Shipping a unit in anything other than the manufacturers packaging voids the warranty. Replacement packaging is available from Plasmon.

The library must be parked before packing the system.

Follow these steps to pack the library for shipping:

1.While parking, the library prompts for insertion of the MTE packaging material.

2.Insert the first piece of foam under the Rotation Station. Place this foam so the tab is on the top left side when viewed from the back of the library.

3.Insert the second piece of foam under the MTE being careful not to damage the vertical path emitter. Place this foam so the cut-out is on the left when viewed from the back of the library.

Foam tab

1st Piece of Packaging Foam

2nd Piece of Packaging Foam

Figure 16. Packing the D875 - D2175 Libraries (a)

Library Installation	Plasmon D875 - D2175 User Manual
Page 28	Document Revision E