Plawa Scrivo.1 - page 12

6. Select “Options” in the Bluetooth Devices Window and then check the correspondent boxes as
shown below.
7. Select “Devices” in the Bluetooth Devices Window and then click the “Add” button for adding
the device.
8. When the window “Add Bluetooth Device Wizard“ is displayed, turn on scrivo.1´s power
switch and pair it with scrivo.1´s cradle (receiver). Then, click “Next”.
4. After step number 3, you will see a new window as shown below. Select “COM Ports” and
then click the “Add” button for adding COM
Ports.
5. In the Add COM Port window, select the “Incoming” button and click “OK”, as shown above.
The window with the added COM ports will
appear, as follows. You can check your connec-
tion status by looking at the Bluetooth icon in
the system tray on the bottom right.
22 23
scrivo1_manual_eng_rz_kb2.qxd 06.12.2004 17:40 Uhr Seite 22