Fro n t Pa n e l Fu n c t i o n s
1. DISPLAY LED
An LED on the front panel indicates that the power is on. When first switched on, the display LED will immediately light and will remain lit during the time the net work audio player is powered on.
1
R e a r Pa n e l Fu n c t i o n s
This panel incorporates the terminal for connecting the input signal from a Net work storage device, outputs to the preamplifier, ground lif t switch and also the mains supply. Please remember that your Plinius Tiki Net work Audio Player is a high qualit y elect ronic inst rument. Be sure that you understand your system’s requirements fully before you make any connection to this net work audio player.
4 5
1 | 1 | 2 | 3 |
|
|
|
1. OUTPUT TERMINALS
Connections for preamplifiers or integrated amplifiers are provided on the rear panel. Connections are available for analogue single ended RCA and balanced XLR cables.
The XLR output pin configuration used in all Plinius product is:
PIN 1 to GND
PIN 2 to +Signal
PIN 3 to
NOTE: Because of the way balanced XLR outputs are configured it is not possible to connect both XLR and RCA at the same time.
NETWORK AUDIO PLAYER | 7 |
