Un p a c k i n g
Open the box from the top and remove the accessories from the foam end caps.
You may now proceed to lif t the unit from the box, Once the unit is removed you can proceed with the removal of the foam end caps. These caps are designed to fit on the front and back of the unit for maximum protection. Retain the packaging for future t ranspor tation of this unit.
P l a c e m e n t & Ve n t i l a t i o n
Your Plinius product may operate at a moderately high temperature, especially
during ex tended listening sessions. With this in mind, we recommend the following guidelines for placement and ventilation:
•The ideal location is upon a rigid stand, away from direct contact with any temperature sensitive materials, furniture or deep pile carpets.
•Ventilation through and around the amplifier should be kept unimpeded.
•Ensure heat vents (slots in the lid) are not covered or restricted in any way.
•Equipment racks should be of an open type with no closed side panels and no closed front or rear panels. Ensure a minimum of 100mm clearance on all sides of your Plinius unit to other equipment and the shelf above. If the unit is in an enclosed
cabinet, the clearance should be greater than 200mm on all sides. Ensure the space between the chassis and shelf below the unit is unobstructed at all times.
•When stacking separate audio components, apply the minimum clearances above, as well as a minimum of 400mm clearance above the top unit for suitable air flow.
•NOTE: This unit has been designed for use in moderate climates only, not for tropical conditions.
The design of this Plinius product incorporates a ver y high level of mechanical
decoupling of the input and output. It can however still be influenced by acoustical
feedback in the operating environment. The use of acoustic cones or a suitably spiked amplifier stand or table may fur ther enhance the per formance of this amplifier. Consult your Plinius dealer for fur ther advice if required.
4 | PLINIUS TIKI |
