Marking
on case
back
Water resistant Water resistant 50m Water resistant 100m
Wash splashes, Bathing and
sweat, swimming raindrops etc.
x
xx
xx
Skin diving | SCUBA |
with snorkel | diving (with |
(no air tanks) | air tanks) |
x
Water resistant characteristics
Splashes, raindrops etc.
Minimum for bathing and swimming*.
For frequent use in water but not SCUBA diving.
*These characteristics also apply to Polar WearLink W.I.N.D. transmitters marked Water resistant 30m.
Frequently Asked Questions
What should I do if...
...the battery symbol and Battery low is displayed?
The low battery indicator is usually the first sign of an expired battery. However, in cold conditions the low battery indicator may appear. The indicator will disappear as soon as you return to a normal temperature. When the symbol appears, the Training System sounds and backlight are automatically deactivated. For further information on changing the battery, see Care and Maintenance.
...I do not know where I am in the menu?
Press and hold STOP until the time of day is displayed.
...there are no reactions to any buttons?
Reset the Training System by pressing all the side buttons simultaneously for 2 seconds. After the reset, press the red button, Start with sulky settings is displayed. You can either accept the sulky settings with OK or change the sulky settings. Then Basic Settings is displayed. Set the time and date, all the rest of the settings are saved. For more information see Basic Settings and Measuring Wheel Size. If you do not want to change the rest of the settings you can skip them by pressing and holding STOP. All the exercise data is saved.
...another person with a Training System or a heart rate monitor is causing interference?
See Precautions.
...the heart rate reading becomes erratic, extremely high or shows nil (00)?
