Polaroid SprintScan 45 manual

The second port (25-pin) can be used to connect another SCSI device to the chain, using another SCSI cable.

3Terminate the signal at the last device in the chain. If the scan- ner is the last device, connect the terminator provided to the 50-pin port. Then connect the SCSI cable to the terminator (picture 3). Be certain to use only SCSI-specified cables for all connections in the chain. For details, see pages 2-8–2-9.

3

The diagrams on the following pages will serve as a reference to correct SCSI connections for various system configurations.

4Change the SCSI address of the scanner, if necessary, by press- ing the button marked (-) or (+) above and below the switch; see page 2-5 for details.

Setup and use 2-7