I n s e rting the carrier into the scanner
1Open the carrier access door (picture 17).
2Insert the carrier gently and firmly into the carrier slot as shown, until you feel it stop (picture 18).
17 | 18 |
3Close the carrier access door. The scanner will not scan if the door is open.
Note: Do not open the carrier access door while a scan is in process; the scan will be interrupted. The scan will resume when the door is closed, but the quality of the scan may be reduced. Scan again with the door closed for best scanning quality.
4Initiate the scan from your software. The software will prompt you when the scan is finished.
Removing the carr i e r
1When the scan is complete, open the door and remove the carrier. Remove the film and store it properly to protect it from dust and fingerprints.
2Close the carrier access door. The door should be kept closed at all times to protect the mechanism from dust.
