Polycom 7000 System Uptime Report Memory Statistics Reports, System Memory Statistics Report

IAD Reports

240

Otherwise, the following information is displayed for each entry:

Table 12–30.PPP Authorization Report

Parameter

Authorization type

Slot #/Interface #/Port #

Userid/Password/Peer Name

Description

None Password Authentication Protocol (PAP)

Client PAP Server Challenge Handshake

Authentication Protocol (CHAP) Client CHAP

Server

active slot for the PPP interface

values for the PPP interface

System

Uptime

Report

Memory

Statistics

Reports

Press any key to return to the Reports menu.

Type U on the Reports menu to display the amount of time elapsed since the IAD was reset:

The system has been running for 11 hours, 45 minutes, 26 seconds.

Press any key to return to the Reports menu.

Type O on the Reports menu to display the Memory Statistics menu. The Memory Statistics menu (1-O) contains two memory display commands:

Figure 12–8. Memory Statistics Menu

***************************************************

Memory Statistic Menu

***************************************************

M. Display System Memory Statistic

T. Display Kernel Tasks Memory Statistic

To display a specific memory statistic report, type the option. For details, see the corresponding section, following.

System Memory Statistics Report

Type M on the Memory Statistics menu to display the System Memory Statistics report. The System Memory Statistics report displays the following details about system memory:

Total Memory Size	8192KB (8388608		Bytes)
Total Allocated Memory	7454KB (7633688		Bytes)
Total Free Memory	737KB (754920	Bytes)
Kernel Memory Size	1152KB (1179648		Bytes)
Kernel Memory Allocated	901KB (922848	Bytes)
Allocated Blocks	1143 Blocks
Largest Alloc Block Size	159KB (163248	Bytes)

NetEngine IAD User Guide