Polycom 7000 Reset system, Remove lan ip address Set bridge global, Set bridge global on off

Command Line Interface 246

reset system

Description. Performs a soft system reset.

reset system

Discussion. Any time you use the menu or command line interface to make setting changes, or change any of the physical characteristics of the IAD (such as changing the MAC address of the Ethernet port), you must reset (or restart) the IAD for the new settings to take effect. An alternative to issuing the reset command is to simply turn off (or unplug) the IAD, and power it back on, forcing it to reboot.

CAUTION Rebooting the IAD terminates all telephone calls in process, and data sessions in process. Ensure that there are no services being rendered before you reset the IAD.

remove lan ip address

set bridge global

Description. Removes the LAN IP address. If you do not enter any optional parameters, the IAD locates and removes the first available slot, interface, port and connection.

remove lan ip address <IP address> <netmask> (slot) (interface) (port) (connection)

IP address

IP address to remove, in octal format (999.999.999.999) netmask

Subnet mask in octal format (255.255.255.255)

slot

Slot number (1 to 7) interface

Keyword identifying the interface: ETHERNET ADSL XDSL SDSL port

Port number (1 to 8) connection

Index of this IP address associated with the port (0-7)

Description. Enable or disables bridging globally.

set bridge global <on off>

on off

Keyword to enable (on) or disable (off) bridging globally.

NetEngine IAD User Guide