Polycom 7000, 6000 manual Physical Interface, Selecting the xDSL Interface Type

WAN Configuration 60

Selecting

the Physical Interface

On all IADs except the 6500 series, the WAN interface is fixed. On 6500 IADs, you may select G.SHDSL or SDSL as the interface.

6504 This section is for selecting either G.SHDSL or SDSL as the

6504i WAN interface on the 6504, 6504i and 6508.

6508

1.Type 1 (Configure Physical Interface) to display the G2237 xDSL Configuration menu.

Figure 4–8. G2237 xDSL Configuration menu

******************************************

G2237 xDSL Configuration

******************************************

Current Interface Type is: G.SHDSL-A.

Mode: CPE, Rate Mode: FIXED,

Line Rate: 88K, Debug: DISABLED.

1.Select xDSL Interface Type

2.Select CPE/CO Mode

3.Enable/Disable Adaptive Rate Mode

4.Select Line Rate

D. Enable/Disable G2237 xDSL Debug Messages

Selecting the xDSL Interface Type

1. Type 1 to display the G2237 xDSL Interface Type menu.

Figure 4–9. G2237 xDSL Configuration menu

********************************************

Configure xDSL Interface Type

*******************************************

Current xDSL Interface Type: G.SHDSL

1.G.SHDSL Annex A (U.S.)

2.G.SHDSL Annex B (Europe)

3.SDSL

Type the option to select G.SHDSL Annex A for operation in U.S., Annex B for operation in Europe, or SDSL.

2.The IAD sets the interface type and displays the menu.

3.Press Escape to return to the xDSL Configuration menu.

4.Reset the IAD (page 15) when you finish WAN configuration.

NetEngine IAD User Guide