Manuals / Polycom / Communications / Telephone

Polycom DCN200, BPX100, GCN100, DCX200 SpectraLink Corporation, Part Number 72-1004-01-J.doc, Page

Models: 72-1004-01 GCX100 BPX100

1 50

Download 50 pages 7.7 Kb

Page 31

SpectraLink Corporation

NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide

to open or repair a defective Battery Pack. Contact your service representative for assistance.

The indicator light will turn off when charging is complete. Full charging is accomplished in approximately two hours for either slot.

Charging indicator While the handset is charging in standby mode, it will display its extension number and Charging…. The battery icon will show

charging progress. The handset is fully operational and will ring if called. When the handset is charging while turned off, only Charging… will display and no calls will be received.

Charge Complete When the handset is fully charged, Charge Complete will display. If the handset has been turned off, the charge complete melody will play when it is turned on.

Part Number: 72-1004-01-J.doc

Page 31

Image 31

Polycom DCN200, BPX100, GCN100, DCX200, DCX100, BPN100, s640, s340 SpectraLink Corporation, Part Number 72-1004-01-J.doc, Page

Contents

SpectraLink Radio Protocol SRP Cisco SCCP Protocol ITU H.323 Protocol NetLink e340/h340/i640 Wireless Telephone and AccessoriesUser Guide Part Number Issue JContact Information Trademark InformationPatent Information Copyright NoticeTable of Contents shown actual size The NetLink e340 Wireless TelephoneThe NetLink h340 Wireless Telephone The NetLink i640 Wireless Telephone Operating Instructions Status IndicatorsModes of Operation Basic Operation The Wireless Telephone Headset System Feature Activation Using the Softkeys 2 nd Level Setting User PreferencesDefault setting Standby menu itemLock keys NavigationRing options System info Phone optionsSelecting a channel See Setting User Preferences above ExtensionPush-to-talk PTT Push-to-talk operationTransmitting Once a call has been initiated, hold the handset two inches from your mouth and talk into the microphone. When the Talk button is released, the NetLink i640 Wireless Telephone then enters the waiting state where it monitors the channel for up to ten seconds Making a PBX call during a PTT call Incoming PBX call during a PTT callIncoming PTT call during a PBX call The NetLink Docking Station NetLink e340/h340/i640 Wireless Telephone AccessoriesThe NetLink s340 Docking Station and NetLink s640 Docking NetLink 150 Gateway software version http//wwwH.polycom.com/usa/en/support/voice/wi-fi/wi-fi.htmlhttp//www3.polycom.com/usa/en/support/voice/voice.html highlighted Using the Softkeys The Line/Feature keys2 Voicemail Page Push-to-talk PTT NetLink s640 Docking Station onlySpectraLink Corporation Part Number 72-1004-01-J.docPage NetLink e340/h340/i640 Wireless Telephones and Accessories User GuideSpectraLink Corporation Part Number 72-1004-01-J.docwith a low-volume ring and display the system message Battery Packs Do not dip the Battery Pack in water or throw into fire NetLink Desktop Chargers NetLink Dual Chargers Page NetLink e340/h340/i640 Wireless Telephones and Accessories User GuideSpectraLink Corporation Part Number 72-1004-01-J.docshown with four empty charging bays NetLink Quad Chargersshown with two empty charging bays Input rating Page Important Notes about Chargers and Battery PacksSpectraLink Corporation Part Number 72-1004-01-J.docGeneral Care of the Handsets and Chargers PLEASE NOTE Tips for UseOverview Appendix A Cisco SCCP ProtocolTabTab Battery icon Navigation arrows Call two status Call one status Feature AccessVoicemail indicator Line numbers Signal strength icon If you want to… Call Status IconCall State DescriptionFeature Access Appendix B ITU H.323 ProtocolOverview Feature activation These variations are explained in this appendix Appendix C Mitel NetworksCertain features and handset operations vary from the SRP protocol OverviewActivate the fixed features on the off-hook handset by pressing FCN First screen 1 Trans/Conf 2 Cancel 3 Message 4 Redial Feature AccessSee FCN Display above for explanation of OAI position Overview Appendix D SIP Session Initiation ProtocolOnly outgoing calls are permitted as the second call on a given line Basic Operationnumber on any line appearance NOTE CONCERNING THE WIRELESS TELEPHONES Safety and Regulatory InformationOPERATIONAL WARNINGS Hearing Aids ELECTRO MAGNETIC INTERFERENCE/COMPATIBILITYFacilities Medical DevicesHandset Operation Normal Position SPECIFIC ABSORPTION RATE SAR INFORMATION