Polycom BPX100, GCN100, DCX200, DCX100, BPN100, s640, s340, 72-1004-01, GCX100 System Feature Activation

SpectraLink Corporation NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide

Using the speakerphone To answer a call by using the speakerphone, press the SPKR button or press or the Start Call button and speak at the NetLink Docking Station using a normal tone of voice.

Answer a second line If you are on a call and hear subdued ringing, a call is coming in on a second line. The line number on the display and the LED of the incoming line may be flashing. To answer this call, put your first call on hold and press the Line key of the second call.

Hang up At the end of each call, return the handset to the cradle or press the SPKR or End Call button. Be sure to do this at the end of each call.

Change speaker volume During a call, you may increase or decrease the volume of the speaker by pressing the corresponding Up or Down button located below the softkeys.

System Feature Activation

The features that have been programmed in your system may be viewed and activated through the Shortcut Menu and Softkey Functions. Place the NetLink Docking Station in active mode by picking up the handset or pressing the Start Call button or SPKR button The Shortcut Menu, softkeys and system features then become available.

Navigation, and Press the ∧ and ∨ buttons to highlight feature descriptions in the Volume softkey function display area. To activate a feature, you may press its buttons softkey, its shortcut key, or the SEL key while the option is

highlighted.

CONF The four buttons below the keypad are programmed for TRNSFR Conference, Transfer, Line and Hold. The functioning of these

LINE feature keys varies according to system. Contact your system HOLD administrator for information about using these buttons in your

system.

The Shortcut Menu

System features that are accessible by the NetLink Docking Station may be viewed by pressing the MENU button when you are off- hook. A feature menu displays in the Main display area. This is the Shortcut Menu.

Using the Shortcut keys Programmed features may have the number 1-9, *, 0, or # in the left column of the Shortcut Menu. This is the shortcut key that activates that feature. To activate the feature using its shortcut key, press the shortcut key at any time while in the Shortcut Menu. The feature will activate whether or not that feature is currently displayed or highlighted. No shortcut indicates that the feature does not have a shortcut key.

Part Number: 72-1004-01-J.doc Page 22