AT&T System 85 manual Ten User-Programmable Feature Buttons, Message Light

7103A Programmable Voice Terminal

PROGRAM button —This button is used to enter mode for programming feature buttons for feature access or for Repertory Dialing. With the Repertory Dialing feature, the termi- nal user can store in-house or external numbers. Operation of this button also puts the Last Number/Wait button into the Wait mode.

Ten User-Programmable Feature Buttons

The 10 programmable buttons allow each user to enter often-used telephone numbers or choose the most desirable features provided by the system.

Message Light

The green Message light goes on when a message is left for the user. It goes off when the user retrieves the message.

Other Physical Features

Handset

The 7103A voice terminal is equipped with an R-type handset.

Dial pad

The 7103A voice terminal is equipped with a 12-button touch-tone dial pad.

Jacks

The 7103A voice terminal housing contains three jacks. The handset cord jack is just under the left side of the housing. The LINE and OTHER jacks are on the bottom center of the housing. The handset contains a jack for the handset cord.

Cords

Two cords are supplied with the 7103A voice terminal: a coiled 7-foot modular handset cord and

a 7-foot modular line cord. Optional longer cords are available: a 12-foot handset cord; 14-foot and 25-foot line cords.

Ringing

The 7103A voice terminal has electronic tone personalized ringing. The personalized ringing is controlled by two ring switches on the bottom of the voice terminal. The volume control is on the left side of the housing.

3-42