AT&T System 85 manual Caveats

8434 and 8434DX Voice Terminal

Switch Administration

Aliasing

Use the following table to administer the 8434 and 8434DX voice terminals:

Note: The voice terminal can be administered so it can access the softkey features OR it can be administered so that it has access to more coverage buttons.

If you have	and this	(which can	administer
this System	Release	support this	the 8434
		type of	or 8434DX
		operation)	as a
System 75	R1V1 — R1V3	4-wire only	7405D+D+F
System 85	R2V2 — R2V4	4-wire only	7405D+D+F
Internat’l System 75	IR1V4, etc.	4-wire only	7405D+D+F
DEFINITY G1		4-wire only	7405D+D+F
Global DEFINITY ’91		4-wire only	7405D+D+F
			or 7434+D
DEFINITY G2V1		4-wire only	7405D+D+F
			or 7434+D
DEFINITY G2V2		4-wire only	7405D+D+F
			or 7434+D
DEFINITY G3i, G3r,		4-wire only	7405D+D+F
G3s, G3vs			or 7434+D
DEFINITY G3V2		2- or 4-wire	7405D+D+F
			or 7444
DEFINITY G3V3		2- or 4-wire	8434D

Key to Abbreviations:

+D = with Display Module

+F = with Feature Key Module

CAVEATS:

The 8434 and 8434DX may be aliased as a 7405+D+F to support features on all systems. How- ever, in this case, while all the call appearance/feature buttons AND the softkey features will be functional, there can be a maximum of only 10 call appearances. On the 7405, the Display Module is a 1-line display, and thus the 1-line display option should be selected.

On some systems, the 8434 and 8434DX can be aliased as a 7434+D or a 7444 to support cov- erage. In this case, there can be up to 34 call appearances (including bridged call appearances), but the 15 softkey features will NOT be functional because the Feature Key Module is not allowed with the 7434 or 7444. On the 7434, the Display Module is a 1-line display, and thus the 1-line display option should be selected. If the set is administered as a 7444, it can be optioned for a 2-line display.

3-289