7205H Voice Terminal

Ringing

The 7205H voice terminal has electronic tone ringing. The volume control is on the left side of the housing.

Mounting Options

The 7205H voice terminal comes equipped with a nonadjustable desk stand. An optional wall mounting kit can be ordered.

Color Options

The 7205H voice terminal was available in various colors; however, maintenance replacements will be black only.

Distance Limitations

The maximum allowable distances of a 7205H voice terminal from the System 85 and DEFINITY G2 cabinet are shown in the following table.

 

 

 

NOMINAL MAXIMUM RANGE

SYSTEM

PORT BOARD

ADJUNCTS

IN FEET (METERS)

 

 

 

24 AWG

26 AWG

SYSTEM 85

SN224

0

3,000 (915)

2,300

(700)

DEFINITY G2

 

1

1,750 (533)

1,100

(335)

 

 

2

1,000 (305)

750

(288)

Power Requirements

The 7205H voice terminal is powered by the tip and ring leads. If the 7205H is equipped with the S101A speakerphone or the 500A headset adapter, auxiliary power will be required for the adjunct. Refer to the ADJUNCT POWER section of this manual.

The C201A call coverage module attaches to the top of the voice terminal, and the F201A func- tion key module attaches to the right side. These optional modules use the same phantom power from the switch (through the digital pairs) that also powers the 7205H voice terminal. This impacts the distance allowed from the switch.

3-67

Page 157
Image 157
AT&T System 85 manual SN224 000 300 700