MDC 9000 Cordless Telephone
Headset (ON/OFF Button)
This button is used for turning the headset on and off.
LCD Display
The display provides information on line status, whether the telephone is out of range, whether
the battery is low, if you have a message, and when you are in program mode.
Dial Pad
The telephone has a standard 12-button pad for dialing telephone numbers and accessing
features.
Directory Card
The set has a directory card for writing or typing names of frequently dialed telephone numbers
or extensions. It is located on the bottom of the handset cover.
User Instructions
The set also provides you with a quick reference that you can pull up to review basic procedures
for using this telephone’s features.
Antenna
The antenna is used for receiving the transmissions from the radio module. This antenna is flexi-
ble and is permanently attached to the handset.
Earpiece Volume Control Switch
This volume control is used for sliding between the two earpiece volume control positions, Normal
and High.
Battery Charging Contacts
The contacts are used for charging the handset when contact is made with the charging base.
Headset Jack
This jack is used for connecting the headset to the handset.
3-463