AT&T System 85 manual Charging Base Features

MDC 9000 Cordless Telephone

Charging Base Features

Talk Indicator

This indicator is lit when the handset is off-hook. (The ON icon on the handset is also lit.)

Charge Indicator

This indicator is lit when the battery is charging and the handset is properly placed on the base.

Message Indicator

This indicator is lit when you have a message. (MSG also appears on the handset display.)

Ringer Volume Controls

This volume control is used for adjusting the base’s ringing volume. Press the left button to decrease the ringer volume; press the right button to increase the ringer volume.

Note: When the handset is on the base, only the base rings. Both ring when the handset is out of the base.

Base Ringer

This is the ringer located in the base.

Handset Hook

This hook is used for hanging up the handset in the base.

Battery Charging Contacts

These charging contacts are used for charging the handset when contact is made with the charg- ing base.

Power Cord Jack

This jack is used for connecting the power cord to your telephone. This cord is then plugged into a wall outlet. This jack is located on the other side of the base.

3-464